shear

英 /ʃɪə(r)/ 美 /ʃɪr/

【shear】 的中文含义:

及物动词
剪羊毛,切断,剪切,剥夺
不及物动词
剪切,修剪,穿越,[力]切变
名词
大剪刀,剪下的东西,剪切,[力]切力

【shear】 的词态变化:

【shear】 的相关例句:

  • 1
    The novel - flocculant poly - nucleate aluminum hydroxy silicate - sulphate ( PASS ) was prepared and polysilicic acid under non - high shear condition. 在非高剪切力条件下,将硫酸铝引入到聚合硅酸中合成了新型聚硅酸硫酸铝 ( PASS ) 絮凝剂.
  • 2
    Textbooks commonly denote shear stresses by the symbol and two subscripts. 教科书通常用符号和两个脚标表示剪应力.
  • 3
    Slitting knives are used to shear the fabric to a precise width. 横切刀被用来将布剪裁到精确的宽度.
  • 4
    The results showed that starch pastes owned pseudoplastic and the shear - thinning characteristics. 结果表明:所有的样品糊均呈现假塑性流体特征.
  • 5
    Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge. 文摘: 斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.
  • 6
    There may be widespread changes in ground elevation as well as horizontal or shear displacements. 地面标高可能发生广泛的变动,也可能发生水平位移或剪切位移.
  • 7
    Extensive through - thickness shear causes crack - tip necking. 大范围的穿透厚度剪切引裂纹顶端的颈缩.
  • 8
    Normally the shear velocity is about half of the compressional velocity. 一般地说横波速度大约是纵波速度的一半.
  • 9
    It is genetically a metamorphic deposit controlled by shear zone. 400℃,矿床属剪切带型中温变质热液成因.
  • 10
    Sheet Metal , Metalworking Guillotine , Shear, Bend Shear , New , Used, Machinery Sheet Metal. 采购产品金属板材, 金属加工(剪切, 弯曲)机械钣金.
  • 11
    The metallocene is summarized as strata, lithology, structure, and especially brittle - ductile shear zone. 该区金矿的控矿条件为地层岩性和构造, 特别是脆 - 韧性剪切带.
  • 12
    Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验.
  • 13
    Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh. 米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试.
  • 14
    The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数.
  • 15
    The paper analyes interation shear , fluid forming process , and discuss the ore forming mechanism. 并在此前提下提出了构造-流体-岩石相互作用的金成矿机理.
  • 16
    Without loss of generality, shear deformations will be neglected. 不失一般性, 忽略不计剪切变形.
  • 17
    As a result the FRP shear contribution may be over - estimated. 因此,以往的方法高估了FRP条带的抗剪贡献.
  • 18
    The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed. 探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响.
  • 19
    The pumps must be of the low shear Archimedes screw type. 泵必须是低剪切力的阿基米德螺旋式泵.
  • 20
    For any load the function from load is in multiplication shear force by antisymmetry load. 任意荷载的作用含反对称荷载分量的图乘剪力的作用.

按字母检索单词

A–Z 共 26 个字母
全部 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z